二苯二硒的合成和晶体结构

报道了一种新的合成工艺,采用氯化镉为催化剂,利用空气中的氧气直接氧化苯硒酚合成了二苯二硒晶体,表征了其晶体结构和红外光谱性质。晶体属于正交晶系,空间群 P21 21 21,a= 0 5646 (2) nm,b= 0 8288 (3) nm,c=2 4100(9)nm; V=1 1276(7)nm3,Dc=1 839 g·cm-3,Z=4, R=0 0259。     

ESI-MS法对重烷基苯烃基结构的研究

采用多种分析手段,其中以电喷雾质谱为主的方法研究了重烷基苯的烃基结构。首先通过柱色谱法对重烷基苯进行分离,将其分成了六个族组分。通过各族组分的红外、紫外鉴定,确定它们各自的归属,用电喷雾质谱测定Ⅱ～Ⅴ族组分磺酸盐的相对分子量分布,结合红外、紫外测定的结果及每族物质的不饱和度和通式,推算出了烷基芳烃部分的相对分子质量和烷基的碳数分布。重烷基苯中几个主要成分的碳数分布为:其中二烷基苯的碳数分布在10～25之间,单烷基苯的碳数分布在10～25之间,烷基萘的碳数分布在5～20之间,烷基二联苯的碳数分布在4～19之间。     

有机化合物及聚合物的计算机辅助红外光谱法鉴定

建立了计算机辅助红外光谱法鉴定有机化合物及聚合物的新方法,介绍了计算有机化合物和聚合物的一些经验公式。程序设计首先收集、整理常用聚合物、有机添加剂和有机小分子的红外光谱数据,然后提取反映该物质特征的吸收峰数据,制作ACCESS数据库,利用VisualBasicDAO数据链接方式,根据查询要求动态链接数据库,利用要求查询的聚合物特性,经过经验公式的算法翻译,生成SQL查询语句进行查询。     

UV‐radiation–induced preirradiation grafting of methyl methacrylate onto lignocellulose fiber in an aqueous medium and characterization

The preirradiation method of grafting has been established by ultraviolet radiation. Methyl methacrylate (MMA) was grafted onto jute fiber in an aqueous medium. The variation of graft weight with UV‐radiation time, monomer concentration, and reaction time was investigated. The conversion of monomer into homopolymer and graft copolymer was evaluated. The graft weight passes through a maximum value (～ 122%) with UV‐radiation time. The optimum value of the monomer concentration was evaluated for maximum degree of grafting. Graft copolymerization of MMA onto lignocellulose fiber significantly increases the elongation at break (～ 65%) compared to that of the “as‐received” sample. However, a linear decrease on breaking load was observed with the increase of graft weight. The estimation of degree of grafting was achieved using an IR technique by correlating band intensities with the degree of grafting. Considering the water‐absorption property, the grafted sample showed a maximum up to 61% decrease in hydrophilicity compared to that of the as‐received sample. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1667–1675, 2004     

Thermooxidative degradation of natural rubber/clay composite

The clay is treated with a reducing agent and an acid so as to obtain a clay containing various metal components with a variable‐valence state. Then, the clay is coprecipitated with natural rubber (NR) latex to prepare a vulcanized NR/clay composite. The degradation process of the NR/clay composite under hot air condition was studied dynamically by using a Fourier transform infrared spectrometer attaching an in situ sample cell and was also investigated using the TGA method. The test result obtained from the infrared spectrometry indicated that under low decomposition temperature, the decomposition products of the test samples mainly are ethylene, low molecular olefinic hydrocarbon, and carbonyl compounds. As the decomposition temperature rises, the low molecular olefinic hydrocarbon content decreases, the olefine with longer chain is formed, and a lot of alkane decomposition products are formed at the same time. When the content of the metal components with a variable‐valence state in clay such as Cu, Mn, Co, and Fe increases, the oxidation products containing the carbonyl group, the olefinic hydrocarbon, and CO₂ in the decomposition product of the test sample also increase. The TGA result clearly shows a shoulder peak that appears by the side of the main peak on the DTG curve of NR/clay composite. With the increase in the content of metal components with variable‐valence state in clay, the initial degradation temperature of the test sample (T₀), the degradation peak temperature (T_p1), and the final degradation temperature (T_f1) in first‐stage reaction, as well as the degradation peak temperature (T_p2) and the last final degradation temperature (T_f) in second‐stage reaction of all the test samples more or less shift to the direction of low temperature; besides, the activation energy (E) of the reaction of the test samples more or less decreases. This means that the metal components with variable‐valence state promote the oxidative degradation of the clay–rubber masterbatch. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3809–3815, 2006     

Lipid adsorption on commercial silica hydrogels from hexane and changes in triglyceride complexes with time

The structures of and lipid complexes with two commercial silica hydrogels (Trisyl and Sorbsil 40), which contain about 60% moisture, were examined by diffuse reflectance Fourier transform infrared spectroscopy. The spectra suggested that Trisyl contained less moisture than Sorbsil 40. However, the silanol groups of Sorbsil 40 were more active in adsorbing oleic acid, triglyceride, and phosphatidylcholine (PC) from hexane than those of Trisyl. Both adsorbents strongly bound PC through the PC carbonyl and phosphate groups. Lipid adsorption from hexane solution by Trisyl depended solely on trapped moisture, while Sorbsil 40 used moisture and silanol groups on the silica surface. Spectra of triglyceride-silica hydrogel complexes, obtained 24 and 72 h after obtaining the initial spectra, showed that Sorbsil 40 adsorption was by Van der Waals forces, but the triglyceride reoriented over time with an increase in hydrogen bonding. In contrast, Trisyl initially adosorbed triglyceride by hydrogen bonding which was stable for at least 72 h.     

Surface-Enhanced Raman Scattering from Polyimide Model Compounds on Functionalized Metal Surfaces. Part II: Phthalic Anhydride/meta-Aminothiophenol/Silver

The interphase between a polyimide and a metal substrate was modeled by depositing phthalic anhydride (PA) onto a silver substrate pretreated with meta-aminothiophenol (m-ATP) and then curing in a mixture of acetic anhydride and pyridine or triethylamine. Surface-enhanced Raman scattering (SERS) and reflection-absorption infrared spectroscopy (RAIR) were used to determine the molecular structure of the interphase. It was found that m-ATP was adsorbed dissociatively onto silver substrates through the thiol groups. The tilt angle for m-ATP molecules adsorbed on silver substrates was determined using RAIR to be approximately 39°. However, there was no preferred rotational angle of the adsorbed APDS molecules about the molecular axes. When PA was deposited onto m-ATP pretreated silver substrates, anhydride groups of PA reacted with amino groups of m-ATP to form amic acids. When PA/m-ATP/Ag samples were chemically cured in acetic anhydride and pyridine or triethylamine, isoimide was the predominant product regardless of the use of pyridine or triethylamine as catalyst. These results were different from those obtained from PA/APDS/Au systems in which imide was the major product in the presence of triethylamine. These differences in the relative composition of cured products between two model systems were explained by the effect of substituents attached to APDS and m-ATP benzene rings.     

Mode of oleic acid adsorption on rice hull ash cristobalite

Fourier transform infrared spectroscopy was used to investigate the adsorption of oleic acid (OA) onto dry rice hull ash (RHA) silica. Adsorption partially occurred by surface hydrogen bonding of the carboxylic acid. There was also formation of carboxylate ions by reaction of OA with residual potassium oxide. These ions were strongly bound by the ash. Isopropanol inhibited OA adsorption by H-bonding and encouraged desorption of H-bonded OA, but without itself being significantly bound. RHA with 40% moisture also adsorbed a small amount of OA by H-bonding and reacted with OA to form and adsorb carboxylate ions.     

Miscibility behavior and coil overlap in ionic blends of phenylated polytriphenylene oxide and poly(methyl methacrylate)

Blends of sulfonated phenylated polytriphenylene oxide and poly(methyl methacrylate‐co‐4‐vinyl pyridine) were examined by dynamic mechanical, Fourier transform infrared, and NMR techniques. A high degree of miscibility was evident from a single drop in a plot of the storage modulus versus the temperature. The presence of ionic moieties due to proton transfer from sulfonic acid to 4‐vinyl pyridine was confirmed by both NMR and IR spectroscopy studies. The coils were found to be close to one another in dimethyl sulfoxide‐d₆ because the aromatic shielding effect of the phenyl rings of the phenylated polytriphenylene oxide units was observed from the upfield shift of most of the protons of poly(methyl methacrylate) in the NMR spectrum. However, the absence of cross peaks in the nuclear Overhauser and exchange spectroscopy experiments suggested that the intermolecular distance between the chains had to be larger than 4 Å. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 728–733, 2003     

Molecular orientation and relaxation in poly(butylene terephthalate)/polycarbonate blends

Rheo-optical Fourier-transform infrared (FTIR) spectroscopy is based on the simultaneous acquisition of stress-strain data and FTIR spectra on-line to the mechanical treatment of polymers and is frequently applied for the characterization of transient structural changes during deformation and stress-relaxation. In the present communication, this technique has been employed in order to investigate the distribution of molecular orientation and its relaxation in uniaxially drawn solution-cast films of semicrystalline partial miscible blends of poly(butylene terephthalate) (PBT) with polycarbonate (PC) containing 10, 30 and 50 wt% PC. The uniaxial deformation of these blend films having a PBT-crystallinity degree ranging from 31 to 12%, in unstretched blends, leads to a appreciable high segmental orientation for the crystalline PBT due to a structural transformation from lamellae to microfibrils. The formation of this fibrillar structure is attributed to non-reversibility of an extended phase with all-trans conformational sequence of the aliphatic segments of PBT, occurring during elongation. The rate of relaxation of this conformational transition, however, increases with increasing amorphous content in the blends. Also it is observed that even with increasing amorphous content in the PBT/PC blends the crystalline PBT shows significant orientation. In such cases, apart from the few lamellae which transform to microfibrils, it is suggested that a stress induced transformation of PBT chains in amorphous PBT-component to irreversible all-trans extended crystalline form also contributes to PBT crystalline orientation. In contrast with this high crystalline orientation, the amorphous PBT located in the interlamellar regions inside the PBT-spherulites show a lower orientation in blends as compared in pure PBT.On the other hand, an overall segmental orientation of PC chains in blends is of lower order which is attributed mainly to low stretching temperature compared to T_g of pure PC. The results are discussed in terms of the resulting spherulitic morphology and the temporary network formed by the elongated PBT and PC chains inside the interlamellar regions, in blends.